The Campo fenders fit perfectly. All of the necessary hardware was included. As the instruction videos show, the wheels need to be removed prior to installing the fenders.

instructions were decent and they seem like they do thr trick

Great! We are having so much fun with these bikes.

I love the look of the fenders however there were no directions with made installing a little confusing and while I figured it out it would have been nice to come with some kind of directions. The only issue I see with the fenders is the rear brake cable dust cover rubs on the rear fender, eventually this is going to cause an issue with ether the fender or thee dust cover itself, For the average person this will never be a problem but for somone like me who rides thousands of miles per year this absolutely will have to be addressed eventually

Fenders. Worked fine. Good product

The fenders are very cool. They keep me dry during the torrential downpours on the way to work.

The fenders look great on my Campo bike. I have a white and black Zizzo so the fenders look nice. The back fender I had no issue with installing. The front fender was a little challenging. I watched the Zizzo video a few times, and was attempting to find out where to bolt the fender; in front or behind its connection point. Either way the front fender was tight. I had purchased new knobby tires a few years ago, so the tires are relatively still new. I thought it was the width of the tire, but I just checked the Zizzo website and the width is the same. I still have the vertical nubs attached to the tire so they were rubbing against the inside of the fender. This was not the issue. Eventually, the nubs would fall off. The decorative piece that is attached to the front fender at its farthest point has more width than the actual fender. The plastic decorative piece was extending downward causing the actual tire along with the nubs to rub against the fender. Since this piece was only heat welded at three points, I carefully removed it to give the tire more clearance. The fix worked, and only the nubs are rubbing against the fender at this point. If you have the knobby 20"X2.0" tires (especially new ones) you may have to spend a little time to install the front fender. The road tires option may be a better fit for these fenders. Overall, the fenders are great! This is my Manhattan commuter bike when I take the train into work from New Jersey. Now I do not have to be doused with ground water every time I ride in the rain! Ride On!

Would have given 5 stars but several screws were missing. I knew it would take weeks to get they replaced, had to go to local hardware store and search though the metric screw section to find matching hardware. Other than that, easy to install, looks and works great.

Light weight. Well built. Fits properly.

The purchase was simple, fast and the shipment by zizzo was excellent. Thank you

The fenders were a little finicky to align such that the front wheel did not rub, however once installed, they work as they should and I've had no issues.

The back end of the front fender touches the tire. I had to remove the plastic piece at the bottom of the fender and bend the metal wire to get about 1/3 in. space between the fender and the tire. The back fender fits fine and with no issues. Also the instructions are not very clear. After installation I had to tune up the front brakes. I love your Zizo Campo bike, guys! :)

Not too difficult to install. YouTube video was very helpful!

The fenders seem good and fit well, but the rear one interferes with rubber boot on the rear brake cable. I suppose it could be lowered slightly by using a spacer. Someone who buys the kit should be aware that there are extra screws and washers that might not be needed for a particular bike.

We purchased it from Amazon for my wife and she loves it. The fenders and accessory we purchased from you and it makes it a complete bike now . Only thing i was not sure of the front wheel nuts when i put the fender on the axel threads are not flush or outside the nut, because of the spacing. The axel nuts only go on half way.

I am pleased with this bike. I think the quality is good. I enjoy it every day. I'm glad I ordered the fenders since I often ride after it rains and I don't want to get wet.

Zizxo bikes are the best for the money and the quality ! We have two and we are very happy with them! Because they are always in our cars for any time to ride.

Great experience. Easy to find what I needed, quick shipping, a great price, and the product exceeds my expectations!

Aloha, The fenders are wonderful, but a little difficult to install, due to the black and white pictures included in the instructions. However, the YouTube video installation was very helpful. Also, torque data for attaching to the wheel axels would be good, too. I went to the Park Tool site for the data, but I don't know if they apply to the Campo's aluminum stays. God's blessings and protection from Covid to you. Aloha, Rudy

We bought 2 sets of fenders for 2 identical Campo bikes. For the first fender installation, I tried to follow the printed directions that came with the fenders. I had lots of trouble and the installation was a bit difficult. Prior to installing the fenders on the second Campo, I watched a video on the Zizzo web site on how to do the fender installation I learned several "tricks" and the installation on the second bike was quick & easy. I recommend that you watch the video before attempting to install the fenders.

Nice, high-quality fenders that were easy to put on, fit perfectly, and work great! The price was competitive to Amazon-sold products and the fenders were shipped/arrived within a few days. I am very pleased and will continue to support Zizzo and their amazing products.

Great customer service.

Instruction pictures are pretty bad, but installing turned out to be easy once figured out. I have the 2022 Campo for this case. Rear fender has two holes that line up with two holes in the frame to screw in, and the stay's ring ends screw into the lower of the two holes in the frame, right above the axle. The front fender's tab goes on the back end of the hole in the front wheel's fork with the bolt, shut in place with the nut, and the stay's ends screw into the axle sandwiched between the frame's ends & the axle nut. I really recommend having the instructional photos revised for more clarity, maybe a drawn diagram or something

Very nice fenders & easy to install accessory. I love the looks of my bike with fenders on.

Really good bike. I would suggest 1. A better mechanism of magnets to lock the bike once it is folded, and 2. A more detailed set of instructions to install the mug guards - the one sent over skip a lot of steps. Despite this, the bike is really good! Thank you

They do the job, but were much more trouble to get on than it really should be thanks to the instructions being very unclear.

The fenders are nice but the instructions were terrible. The pictures were too dark to tell what was going on. They also don’t have video instructions. It’s easy enough to figure out, but you will have to remove the rear wheel if you don’t have tools to turn screws in difficult places.

Just hauled 10 pounds of groceries from the grocery store

I have nothing but great experience with Zizzo. They have answered my questions and I appreciate their help. Thanks.

installing instructions not easy to understand, it took me a little wile to fig it out the installing process, but once install they look so good, and they protect me all right from splashing my legs or my feet. Thank you.

The fenders were easy to install and light weight. Makes the bike more versatile for different road conditions. I am happy with the upgrade.

So far so good !

Love my bike! I have been riding my Zizzo Campo(refurbished) for almost 2 weeks now. Rides nicely/comfortably! It is pretty light weight as I have had to lug it up/down a couple of flights of stairs in my apt. bldg. I had to have the breaks and fenders checked once I got it out of the box. But the staff (Luis) at Zizzo were more than accommodating to help me fix the issue(s). Better to check everything before you ride anyway especially if you are a novice like myself. So far I have rode 46 miles and counting :). Looking forward to many more happy miles ahead (fingers crossed)!

Good product Pour instruction

These fenders get the job done and they make my Campo look stylish!

I forgot to add, this does work for the ferro model of the bike too. I kinda wish the fenders were made out of metal but its a good build.

The bike was pretty much assembled which was nice. Very sturdy and smooth and seems like a good bike for the money. Just a couple of small concerns. I haven't been on a bike in many years and the pedals are a little awkward. It seems like they should've been positioned more forward to make it easier for someone older. It would've also been nice if the handlebars were adjustable.

I would say the fenders are easy to install, just remember to adjust as necessary until the wheel of the bike runs free (without the brakes in place). Even for someone that never did a DIY on a bike, I was able to install them with some help.

I guess the product is as expected, but I didn't know I had to take the wheels and brakes off to install. The instructions were very hard to see and understand but after a few hours I did get them on the bike.

The handle bar is not right straight with the “center imaginary line” of the bike. Is a little bit toward the right. The “pole” of the handle bar moves lightly, does not feel solidly installed. I had to buy accessories to get the final product that I expected.

Easy to install. However , use caution when inserting The screws. My bike had a little paint in the threads!

Fairly easy installation. The instructions sheet needs improvement, as the black and white photo image printed on white paper is very difficult to distinguish the finer details needed for installation.

The fenders really fit good, and the bike looks better.

Love it very nice very good looking looks good very happy thank you