ZiZZO Folding Bike – Pre-Ride Safety Checklist

Structural / Folding Mechanisms

• Frame & Folding Locks –
1. Video guides:
1. All models except Campo and Ferro
2. Campo and Ferro
2. Ensure that the main frame lock is fully engaged and secure.
3. Engage any secondary safety locks if applicable.
• Stem Lock –
1. Video guides:
1. Via, Forte, Urbano, Liberte and Marino
2. Campo and Ferro
2. Confirm that the stem is fully locked in the upright position and cannot collapse.
3. Engage any secondary safety locks if applicable.

Handlebar, Controls & Steering

• Handlebar & Stem –
1. Video guide:
1. Quick release adjustments
2. Set handlebar angle and height for comfort.
3. Make sure both quick releases/clamps are secure and tight.
• Steering Movement –
1. Video guides:
1. Quill style (Campo and Ferro)
2. Threadless style (Via, Forte, Urbano, Liberte and Marino):
2. Turn handlebars left and right to check for smooth movement without looseness/stiffness.

Wheels, Axles & Tires

1. Video Guides:
1. Rear wheel removal (with quick release)
2. Front Wheel Removal (with quick release)
• Wheels Spin Test –
1. Spin each wheel to check for true rotation (no wobble or rub against brakes).
• Axles & Quick Releases / Nuts –
1. Video Guide:
1. Quick release adjustments
2. Tighten axle quick-releases or axle nuts securely.
• Tire Pressure & Condition –
1. Verify tire pressure is within the manufacturer’s recommended range (printed on tire sidewall).
2. Check tires for cuts, embedded debris, and sufficient tread.

Brakes

• Brake Operation –
1. Video Guides:
1. Toe adjustment
2. Brake cable adjustment
3. Barrel Adjustment
2. Squeeze both brake levers to ensure they engage fully, evenly and stops the bike effectively.
3. Confirm brakes do not pull all the way to the handlebar grip when applied firmly.

Drivetrain & Pedals

• Pedals & Crank –
1. Spin pedals to confirm free rotation.
2. If folding pedals are installed, ensure they are locked in the riding position.
• Chain Condition & Tension –
1. Ensure the chain is clean, lubricated, and not excessively slack or tight.
• Gears / Derailleur –
1. Shift through all gears to verify smooth indexing and no jumping or skipping.

Saddle & Fit

• Seat Post Position –
1. Set saddle height for comfort and efficient pedaling.
2. Confirm seat post quick-release is securely locked.
• Rider Fit –
1. Check that rider can comfortably reach handlebars and pedals before riding.

Final Basic Visual Inspection

• Loose Components –
1. Look over the bike for any loose bolts, nuts, or accessories.
• General Condition –
1. Inspect frame, fork, and major parts for dents, cracks, or other damage.

Reminders

• Perform this safety check before every ride.
• Wear a properly fitted helmet and follow local traffic laws.
• Bring the bike to a reputable shop if any part does not function or you are uncertain about adjustment.