Don't miss the "Holiday Sale"
See below banners
Terms and Conditions

Adjusting the Stem Lock (2017 models and older)

This page will guide you on how to adjust the stem lock found on 2017 and older ZiZZO Bikes.

From time to time, you may need to adjust your stem lock. The following instructions will help guide you though this adjustment process. Should you need any assistance, please email us at support@euromini.bike.

Tools Needed:

  • Adjustable Crescent Wrench 
  • Phillips Screwdriver

Before we begin, it is recommended that you have an open and unobstructed work space. The use of a bike stand is recommended but not required.

First, identify your stem lock type. If your stem lock is different from the one pictured, visit our support page for other stem lock styles.

Once you've correctly identified the stem lock, fold the stem halfway.

Begin by adjusting and attaching the wrench to fit the long metal (silver) bar. (See image)

Holding the wrench, so the bar does not move, loosen the Phillips screw. 
The Phillips screw should be LOOSENED and NOT REMOVED.

With the Phillips screw loosened, you can freely turn the adjustment bar. 

Turning the bar to the LEFT will loosen the stem lock.

Turning the bar to the RIGHT will tighten the stem lock.


CAUTION: Only turn the adjustment bar 1/16 to 1/8 turn increments. Raise the stem and test by attempting to lock the stem lock. If it needs to be adjusted further, repeat the steps until the stem lock is sufficiently tightened.


Once the stem lock is adjusted, tighten the Phillips screw.
You're all done!

VOLVER ARRIBA
Promo box

Someone purchased a

Product name

info info